Posts

[iajtzcvfbl] iflight TP X5 HD 214mm 5Inch 6S Toothpick FPV RC Drone XING 2005 1900KV Motor Caddx Nebula Nano COD

Image
Buy iflight TP X5 HD 214mm 5Inch 6S Toothpick FPV RC Drone XING 2005 1900KV Motor Caddx Nebula Nano COD Description: Brand:iFlight Item Name: 214mm TPX5 HD FPV Racing Drone Overall frame size: 151 x 151 mm Base plate thickness: 2 mm Arm Thickness: 4 mm Plate thickness: 2.5 mm Receiver: DJI Receiver/iF8 R81 receiver/ Frsky XM+/ Frsky R-XSR/ Tbs Crossfire nano (Optional) Voltage:6S Weight: 187.6 ± 2 G Motor: Xing 2005 1900kv Camera:Nebula nano Propeller: NAZGUL5030 Graphic transfer system: CADDX VISTA NABULA PRE-TUNED & PRE-SETUP Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience! To restore lost tunes or updates, please check our linked article on   "Firmware/Factory Dumps" Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on  "How to disable Angle-Mode, activate Acro-Mode" GPS Rescu

[eipwxjkmai] 0.42g Happymodel 2.4G ExpressLRS EP1 Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone COD

Image
Buy 0.42g Happymodel 2.4G ExpressLRS EP1 Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone COD 0.42g Happymodel 2.4G ExpressLRS EP1 Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone OVERVIEW: The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released. The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple . Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.

[wobnuwwpsh] 0.44g Happymodel 2.4G ExpressLRS EP2 Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone COD

Image
Get 0.44g Happymodel 2.4G ExpressLRS EP2 Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone COD 0.44g Happymodel 2.4G ExpressLRS EP1 Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone OVERVIEW: The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released. The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple . Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.

[gkkfnoyzuz] 0.47g Happymodel 2.4G ExpressLRS PP Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone COD

Image
Get 0.47g Happymodel 2.4G ExpressLRS PP Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone COD 0.47g Happymodel 2.4G ExpressLRS PP Nano High Refresh Rate Ultra-small Long Range RC Receiver for RC Drone OVERVIEW: The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released. The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple . Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size. Sp

[pvlpjjzwif] T-MOTOR ALPHA V1.2 60A 500HZ 12S FOC HV ESC for Multi-Rotor RC Drone COD

Image
Get T-MOTOR ALPHA V1.2 60A 500HZ 12S FOC HV ESC for Multi-Rotor RC Drone COD Description: Brand: T-MOTOR Model: ALPHA V1.2 60A ( 12S Version) Item Name: 60A 500HZ 12S FOC ESC Voltage:12S External Dimension of electrical adjustment:78.7*32.5*16.2mm Weight (including line):73g Motor wire:Silicone thread, dark orange 16AWG-65MM*3PCS Power Cord:Silicone wire Red/Black 14AWG-160MM Signal Line:PVC wiring-30 CORE-2-300MM (blank BLACK/JR 3P head) Programming Line:PVC  wiring-30 CORE-3-300MM (Black Red White/JR 3P head) Support Voltage(12S):18-50.4V BEC:NO Continuous current:60A Instantaneous current(10s): 80A Standby power consumption:≤50mA Throttle range:1100-1940μs Throttle refresh frequency:500Hz Throttle response speed:300ms Support Motor:  MN501S KV240,MN701S KV135,MN705S KV125,MN601S KV170,MN605S KV170,U10 II KV100,MN7005 KV115,U8II/U8lite KV100,U8II/U8lite KV85 Package Included: 1x T-motor ALPHA V1.2 60A 12S ESC 1x Instruction Manual T-MOTOR ALPHA V1.2 60A 500HZ 12S FOC HV ESC for Mul